KMC SHADOW PRO 2 1.0
2/5,
3
votes
首先,作为KMC主创人,我很荣幸为BeamNG社区里的各位驾驶爱好者带来新东西,也感谢大家的鼎力支持。在模组发布后,我利用空余时间也反复测试了第一代【Shadow Pro】,发现:过高的操控性使得【Shadow Pro】的低速弯表现很不理想,短轴距也把中置引擎的短板放大了,过于猛烈的涡轮介入在出弯没有优势…综合第一代的问题,经过多次调试,全新一代【Shadow Pro】诞生! 这就是Shadow Pro 2!
全部重塑!在这台车上,我们做了更多的改变。轴距增加至2.9m,车重进一步减轻至600kg。更换了一台NA 900cc I3引擎,可输出超2000hp。降低了高转区间扭矩,提高了低转速区间扭矩,极速可超过400km/h。另外还有其他外观优化:增高了驾驶室地板和驾驶位,驾驶布局改为居中,加强的前、后空气动力学套件,加装用于整理气流的侧裙,改进的空气动力学,全新轮毂等。
闲话就谈到这。Shadow Pro 2处处都有大升级,快系好安全带,驾驶这一台怪兽无情征服眼前的弯道吧!
------------------------------------------------------------------------------------------------------------------------------------------
First of all, as the founder of KMC, I am honored to bring new things to all driving enthusiasts in the BeamNG community, and thank you for your full support. After the release of the module, I repeatedly tested the first generation [Shadow Pro] in my spare time, and found that the excessive handling made the low-speed bending performance of [Shadow Pro] very unsatisfactory, and the short wheelbase also magnified the short plate of the central engine. The too violent turbine intervened in the cornering. Advantages... Based on the problems of the first generation, after many debuggings, the new generation of [Shadow Pro] is born! This is Shadow Pro 2 !
All reshaping! We have made more changes in this car. The wheelbase was increased to 2.9m, and the weight was further reduced to 600kg. Replaced a NA 900cc I3 engine, which can output more than 2000hp. The torque of the high-speed interval is reduced and the torque of the low-speed interval is increased, and the maximum speed can exceed 400km/h. In addition, there are other appearance optimizations: the cab floor and driver's seat have been increased, the driving layout has been changed to the middle, the front and rear aerodynamic kits have been strengthened, and the side skirts for sorting out the airflow have been added, improved aerodynamics, new hubs, etc.
That's all about gossip. Shadow Pro 2 has been upgraded everywhere. Fasten your seat belt and drive this monster ruthlessly to conquer the curve in front of you!
全部重塑!在这台车上,我们做了更多的改变。轴距增加至2.9m,车重进一步减轻至600kg。更换了一台NA 900cc I3引擎,可输出超2000hp。降低了高转区间扭矩,提高了低转速区间扭矩,极速可超过400km/h。另外还有其他外观优化:增高了驾驶室地板和驾驶位,驾驶布局改为居中,加强的前、后空气动力学套件,加装用于整理气流的侧裙,改进的空气动力学,全新轮毂等。
闲话就谈到这。Shadow Pro 2处处都有大升级,快系好安全带,驾驶这一台怪兽无情征服眼前的弯道吧!
------------------------------------------------------------------------------------------------------------------------------------------
First of all, as the founder of KMC, I am honored to bring new things to all driving enthusiasts in the BeamNG community, and thank you for your full support. After the release of the module, I repeatedly tested the first generation [Shadow Pro] in my spare time, and found that the excessive handling made the low-speed bending performance of [Shadow Pro] very unsatisfactory, and the short wheelbase also magnified the short plate of the central engine. The too violent turbine intervened in the cornering. Advantages... Based on the problems of the first generation, after many debuggings, the new generation of [Shadow Pro] is born! This is Shadow Pro 2 !
All reshaping! We have made more changes in this car. The wheelbase was increased to 2.9m, and the weight was further reduced to 600kg. Replaced a NA 900cc I3 engine, which can output more than 2000hp. The torque of the high-speed interval is reduced and the torque of the low-speed interval is increased, and the maximum speed can exceed 400km/h. In addition, there are other appearance optimizations: the cab floor and driver's seat have been increased, the driving layout has been changed to the middle, the front and rear aerodynamic kits have been strengthened, and the side skirts for sorting out the airflow have been added, improved aerodynamics, new hubs, etc.
That's all about gossip. Shadow Pro 2 has been upgraded everywhere. Fasten your seat belt and drive this monster ruthlessly to conquer the curve in front of you!
Direct Download Links
About Mod
| Latest Version | 1.0 |
| Game | BeamNG.drive |
| Category | Cars |
| Game Version | 0.38.x |
| Tags | Automation |
| Downloads | 512 |
| Created | 1 month ago |
You Might Also Like »
0 Comments
There are no comments. Be first to comment!