Ford Bronco Ultra4 4400 0.4

The Grullo has had a pretty big overhaul!

This update includes:

ENGINES:

-Added four new 455ci RY45 engine options with approximately 800, 860, 930 and 996 HP.

-Completely rebuilt the engine torque curves using real-world RY45, D3 and similar Ford race-engine dyno data.

-Improved low and mid-range torque so the engines behave more realistically for their displacement.

-Each engine now has its own power delivery, RPM range and limiter instead of being the same curve with different peak numbers.

TRANSMISSIONS AND DRIVETRAIN:

-Reworked the existing Fortin FRST5 transmission with proper dog-ring engagement simulation.

-Added ignition-cut upshifts and automatic throttle blipping on downshifts.

-Badly timed downshifts can now refuse engagement or damage the dog rings.

-Added dog-ring wear and gear failure from repeated bad shifts.

-Added a proper input-shaft brake/transbrake system for launching the truck.

-Prevented first gear from engaging while the transmission input is spinning too quickly.

-Reworked drivetrain losses across the transmissions, drop gear and transfer cases for more realistic power delivery.

DIFFERENTIALS AND 4WD:

-Replaced the fake Detroit-style LSD with a custom automatic locker that locks under power while allowing the outside wheel to overrun in corners.

-Added Detroit locker support to the rear axle.

-Renamed the welded front differential to Front Spool.

-Replaced the old sprag-equipped Atlas setup with a Fortin FRTC2 2-Speed Transfer Case.

-Added selectable high- and low-range drop-gear ratios to the Fortin transfer case.

-Completely reworked the front-output sprag system.

-Unlocked mode now behaves like a proper one-way sprag, driving the front axle while still allowing it to overrun.

LIVE VALVE SUSPENSION:

-Added a complete FOX RAD-inspired automatic Live Valve system for the bypass shocks.

-Uses 14 inputs overall: 6 vehicle-level sensors/inputs, plus 2 individual inputs per shock, allowing the system to react accordingly at every corner and bump.

-The controller has 4 adjustable control equations.

-It automatically manages the compression and rebound bypass circuits in real time, with adjustable maximum authority for each bypass tube.

-Includes automatic jump-landing protection, detects a big jump and closes all bypass valves before a hard landing.

MOTEC C127 DASH:

-Added a completely custom MoTeC C127-style dash interface.

-Added a second round C127 layout with a large central gear indicator and circular tachometer.

-Added live RPM sweeps, engine-specific rev-limit areas and improved tachometer scaling.

-Added sequential shift lights with paired lighting stages and a flashing warning before the limiter.

-Added working coolant temperature, oil temperature, headlight, high-beam, check-engine and low-fuel warning lights.

GENERAL:

-Numerous Lua and JBeam fixes.

-Various tuning, naming and Parts Selector improvements.

-Small performance and UI improvements.

The update is available now for all eligible members.

As always, let me know if you run into any issues or have feedback. Enjoy!

DO NOT FORGET TO CLEAR YOUR CACHE AND RUN MY LATEST WHEEL AND TIRE PACK!

The Grullo has had a pretty big overhaul!

This update includes:

ENGINES:

-Added four new 455ci RY45 engine options with approximately 800, 860, 930 and 996 HP.

-Completely rebuilt the engine torque curves using real-world RY45, D3 and similar Ford race-engine dyno data.

-Improved low and mid-range torque so the engines behave more realistically for their displacement.

-Each engine now has its own power delivery, RPM range and limiter instead of being the same curve with different peak numbers.

TRANSMISSIONS AND DRIVETRAIN:

-Reworked the existing Fortin FRST5 transmission with proper dog-ring engagement simulation.

-Added ignition-cut upshifts and automatic throttle blipping on downshifts.

-Badly timed downshifts can now refuse engagement or damage the dog rings.

-Added dog-ring wear and gear failure from repeated bad shifts.

-Added a proper input-shaft brake/transbrake system for launching the truck.

-Prevented first gear from engaging while the transmission input is spinning too quickly.

-Reworked drivetrain losses across the transmissions, drop gear and transfer cases for more realistic power delivery.

DIFFERENTIALS AND 4WD:

-Replaced the fake Detroit-style LSD with a custom automatic locker that locks under power while allowing the outside wheel to overrun in corners.

-Added Detroit locker support to the rear axle.

-Renamed the welded front differential to Front Spool.

-Replaced the old sprag-equipped Atlas setup with a Fortin FRTC2 2-Speed Transfer Case.

-Added selectable high- and low-range drop-gear ratios to the Fortin transfer case.

-Completely reworked the front-output sprag system.

-Unlocked mode now behaves like a proper one-way sprag, driving the front axle while still allowing it to overrun.

LIVE VALVE SUSPENSION:

-Added a complete FOX RAD-inspired automatic Live Valve system for the bypass shocks.

-Uses 14 inputs overall: 6 vehicle-level sensors/inputs, plus 2 individual inputs per shock, allowing the system to react accordingly at every corner and bump.

-The controller has 4 adjustable control equations.

-It automatically manages the compression and rebound bypass circuits in real time, with adjustable maximum authority for each bypass tube.

-Includes automatic jump-landing protection, detects a big jump and closes all bypass valves before a hard landing.

MOTEC C127 DASH:

-Added a completely custom MoTeC C127-style dash interface.

-Added a second round C127 layout with a large central gear indicator and circular tachometer.

-Added live RPM sweeps, engine-specific rev-limit areas and improved tachometer scaling.

-Added sequential shift lights with paired lighting stages and a flashing warning before the limiter.

-Added working coolant temperature, oil temperature, headlight, high-beam, check-engine and low-fuel warning lights.

GENERAL:

-Numerous Lua and JBeam fixes.

-Various tuning, naming and Parts Selector improvements.

-Small performance and UI improvements.

The update is available now for all eligible members.

As always, let me know if you run into any issues or have feedback. Enjoy!

DO NOT FORGET TO CLEAR YOUR CACHE AND RUN MY LATEST WHEEL AND TIRE PACK!

This update includes:

• New 0.39 lighting system implementation

• Complete engine thermal overhaul

• Drivetrain loss overhaul for more realistic power delivery

• Added a set of more traditional transmissions and transfer cases

• New Chaos Motorsports tune by Mr. Chaos himself, AK Whatley

• New Loren Healy 2023 Shortcourse configuration and wrap

• Adjustable steering rack height to fine-tune bump steer

• Minor shock tuning and adjustments

• General fixes and improvements

The update is available now for all eligible members.

As always, let me know if you run into any issues or have feedback. Enjoy!

DO NOT FORGET TO CLEAR YOUR CACHE!