35 ft & 50 ft Vehicle Trailer

The trailer features an all-steel construction and is available in:
– 2 lengths: 35 ft and 50 ft
– 2 deck widths: 96 in and 102 in
– 4 axle setups: tridem / tandem (single tire), tandem (dual tire), single axle

Suspension uses sliding leaf springs with no shocks, while tandem and tridem axles feature equalizing beams connecting the springs — similar to the vanilla flatbed trailer. Payload ranges from just under 2.5 tons to over 6.6 tons, with each configuration having a unique VIN plate on the trailer’s front panel.

Includes custom-built modular steel 16x6 wheels:
– Zero offset for single tires
– 5.35 in offset for dual wheels
– 4 finish options with custom tires

The trailer comes with two 9 ft aluminum ramps mounted at the rear, manually operated.

Ramp operation steps:

• Park trailer on a relatively flat surface and stop.
• Unlock ramps by pressing the trigger on the locking pins.
• Grab ramps with node grabber (free cam or walking mode), pull them out, and align under each deck (left ramp for left deck, right for right).
• Press trigger on the deck to attach ramps. If not locked, push until a click is heard.
• Ramps can slide left or right depending on the vehicle being loaded, then vehicle can be driven on.
• To remove ramps, press trigger at deck’s rear edge, slide ramps back to center, lift, and slide into the internal deck storage. Placement doesn’t need to be exact as long as it’s inside.
• Press ramp lock triggers again to secure them for transport.

Mod author: RenAzuma66