- The trailer is parked on a relatively flat surface and stopped.
- The ramps are unlocked by pressing the trigger on the locking pins.
- The ramps can be held in place by gripping the assembly either in free cam mode or in walking mode, and then pulled out and aligned under each deck. The left ramp only works with the left side of the deck and vice versa.
- Press the trigger on the deck and the ramps will attach to the deck. If they do not lock into place, push them with the knot grabber until you hear a click.
- The ramps can be moved left or right depending on the vehicle being loaded, and the vehicle can be loaded.
- The ramps are detached using the same trigger on the rear edge of the deck, then moved back to the center, lifted, and retracted into the inner deck. The placement does not have to be exact as long as it is inside the deck.
- The stacking pin triggers are pressed again, the ramps slide, lock into place, and are securely stowed.

Mod author: RenAzuma66