Truck Physics Improvement mod for immersive gameplay

This mod brings a more natural "bouncy" feel to the cabin and adjusts the chassis suspension to better simulate the weight and inertia of a heavy truck. Expect more realistic nodding, rolling, and overall smoother suspension travel.

Key Changes:
Enhanced Cabin Dynamics:
• Maximum pitch angles (front/rear and roll) have been adjusted to more realistic values, providing natural "nodding".
• Softer cabin suspension with increased travel and reduced damping for a smoother, less "plastic" feel.
• Significantly reduced cabin sway bar factor, allowing for more natural lateral movement.

Reworked Chassis Suspension:
• Reduced damping for both truck and trailer axles, making the suspension more reactive to road bumps.
• Lowered sway bar stiffness to allow for more realistic frame roll during cornering.

Drivetrain & Inertia:
• Increased flywheel inertia for more realistic engine RPM behavior and smoother power delivery.

IMPORTANT:
• "Physical camera movement" must be enabled
• "Physical camera movement factor" set to 200%
• "Interior camera horizon locking factor" set to 0%
• "Uneven surface simulation" set to 130%
• Cabin stiffness - 0% (Softer) - 20% (Harder)
• Suspension stiffness - 0% (Softer) - 20% (Harder)
• Truck and trailer Stabilization - 0%
• Braking intensity - 50%
• Torque resonance - 100%
• Steering sensitivity: 0.31 (0.31-0.33 Tolerance) (for keyboard)
• Steering non-linearity: 1.75 (for keyboard)
• Steering animation range: 1380° (for keyboard)

Give this mod hight priority
If you’re not sure about the suspension stiffness, here’s what I recommend:

For older truck models:
Cabin stiffness - 0% Suspension stiffness - 0%
Or
Cabin stiffness - 10% Suspension stiffness 0%

For modern truck models:
Cabin stiffness - 20% Suspension stiffness - 10%
Or
Cabin stiffness - 20% Suspension stiffness - 20%

Credits
Satan666