Kenworth k100 ATS v1.3 (1.39) v1.3
2/5,
20
votes
Changes in 1.3
– adaptation for ATS 1.39
Be sure to sell your old truck before connecting a new one.
Changes in 1.2.1
Edited transmission names.
Sealed some holes in the 90" Aerodyne.
The 1st truck in the dealership is no longer a set-forward axle. The third one is.
Reworked photonic stabilizer.
Reversed tire air rotation.
Added blinker fluid
Adjusted flux capacitor
Changes in 1.2
Removed cab suspension
Set bumper as a chassis accessory, so there won't be need for the custom plate anymore.
Changes in 13.10.19
updated to 1.36
improvements dx11
Changes in 0.97
Added mirrors with longer brackets.
And other fixes.
Changes in 0.96
the 8x4 chassis,
quick job trucks,
some shading rework.
Changes in v0.95
- The odometer display is now standalone. So if you have a custom Volvo dash, it should not interfere.
- The headlight frames are now less meaty.
- Single exhaust is now available on all chassis.
Changes in v0.94
odometer display on the tachograph LCD.
Changes in v0.93
You can move your head further back. And mirror brackets were shortened. They actually kinda look better now.
Changes: v0.92
- Interior accessories are now back inside the cab, on the exterior view;
- Hook locator lowered by 55 millimeters. Trailers are now lower, to eliminate the gap between the 5th wheel & the trailer chassis.
Changelog v0.91
Lamp material was fixed.
The interior shading is reworked.
I have managed to brighten it up around the dash, while somehow, retaining a satisfactory look. :shock:
Secondly, i changed shaders for the upholstery. From dif.spec.oclu, to dif.spec.mult.dif.spec. Wish i knew about this shader from the start.
And, with all the remarks about how "amazingly optimized" my interior is, i took the liberty and replaced the 1k upholstery AO texture, with a 2k texture.
Features:
- 6 chassis (4x2, short 6x4, normal 6x4. One set for 90" cabs, and one for 112" cabs)
- 4 cabs, based on real life counterparts (90", 90" Aerodyne, 112", and 112" Aerodyne)
- Matching interiors for all cabs, 2 styles, each with several color variants.
The interior models are slightly simplified compared to actual ones.
- Paint schemes, based on what you'd see on real K100 trucks.
- Wind deflectors & fairings, based on real life ones.
- Engines by Kriechbaum. The list is minimized, because i find the regular assortment overwhelming. I included the C15 cats, Straight pipe cats, and most of the Cummins.
- Transmissions. 10, 13, 18 speed eatons, 5 and 6 speed allisons. Each comes with 3 different axle ratios. Also, Allisons have a retarder, the Eatons don't.
The chassis models used, are from the base game.
Other parts that you might think are from the base game, indeed are.
Be sure to sell your old truck before connecting a new one.
Link 3 Skin templates
Link 4 k100 custom plate
Credits:
overfloater
Credit for the 3D model of the engine + transmission block, goes to Harven.
Credit for the sounds, and engine defs, goes to Kriechbaum.
– adaptation for ATS 1.39
Be sure to sell your old truck before connecting a new one.
Changes in 1.2.1
Edited transmission names.
Sealed some holes in the 90" Aerodyne.
The 1st truck in the dealership is no longer a set-forward axle. The third one is.
Reworked photonic stabilizer.
Reversed tire air rotation.
Added blinker fluid
Adjusted flux capacitor
Changes in 1.2
Removed cab suspension
Set bumper as a chassis accessory, so there won't be need for the custom plate anymore.
Changes in 13.10.19
updated to 1.36
improvements dx11
Changes in 0.97
Added mirrors with longer brackets.
And other fixes.
Changes in 0.96
the 8x4 chassis,
quick job trucks,
some shading rework.
Changes in v0.95
- The odometer display is now standalone. So if you have a custom Volvo dash, it should not interfere.
- The headlight frames are now less meaty.
- Single exhaust is now available on all chassis.
Changes in v0.94
odometer display on the tachograph LCD.
Changes in v0.93
You can move your head further back. And mirror brackets were shortened. They actually kinda look better now.
Changes: v0.92
- Interior accessories are now back inside the cab, on the exterior view;
- Hook locator lowered by 55 millimeters. Trailers are now lower, to eliminate the gap between the 5th wheel & the trailer chassis.
Changelog v0.91
Lamp material was fixed.
The interior shading is reworked.
I have managed to brighten it up around the dash, while somehow, retaining a satisfactory look. :shock:
Secondly, i changed shaders for the upholstery. From dif.spec.oclu, to dif.spec.mult.dif.spec. Wish i knew about this shader from the start.
And, with all the remarks about how "amazingly optimized" my interior is, i took the liberty and replaced the 1k upholstery AO texture, with a 2k texture.
Features:
- 6 chassis (4x2, short 6x4, normal 6x4. One set for 90" cabs, and one for 112" cabs)
- 4 cabs, based on real life counterparts (90", 90" Aerodyne, 112", and 112" Aerodyne)
- Matching interiors for all cabs, 2 styles, each with several color variants.
The interior models are slightly simplified compared to actual ones.
- Paint schemes, based on what you'd see on real K100 trucks.
- Wind deflectors & fairings, based on real life ones.
- Engines by Kriechbaum. The list is minimized, because i find the regular assortment overwhelming. I included the C15 cats, Straight pipe cats, and most of the Cummins.
- Transmissions. 10, 13, 18 speed eatons, 5 and 6 speed allisons. Each comes with 3 different axle ratios. Also, Allisons have a retarder, the Eatons don't.
The chassis models used, are from the base game.
Other parts that you might think are from the base game, indeed are.
Be sure to sell your old truck before connecting a new one.
Link 3 Skin templates
Link 4 k100 custom plate
Credits:
overfloater
Credit for the 3D model of the engine + transmission block, goes to Harven.
Credit for the sounds, and engine defs, goes to Kriechbaum.
External Download Links:
You Might Also Like »
0 Comments
There are no comments. Be first to comment!